Skip to main content

Diuretics mainly exert their effect by the inhibition of renal tubular reabsorption of sodium and water. These may be classified according to ◆ their efficacy as ● high ceiling (loop and osmotic diuretics), ● medium ceiling (thiazides) and ● low ceiling (carbonic anhydrase inhibitors ● potassium sparing) diuretics. ◆ based on their site of action 1. Diuretics Acting on the Proximal Tubule (Pt) These are non-competitive but reversible inhibitors of carbonic anhydrase and act by inhibiting the reabsorption of sodium in the proximal tubular portion of the nephron. ● Carbonic Anhydrase (CA) Inhibitors net effect of carbonic anhydrase is to cause the absorption of sodium and bicarbonate. (acetazolamide, dichlorphenamide and methazolamide) 2. Diuretics Acting on the Loop of Henle ● Inhibitors of Na+-K+-ATPase loop diuretics and act by causing inhibition of Na+ K+ 2Cl–symporter present at the luminal membrane of the ascending limb of loop of Henle. (Furosemide, torsemide, bumetanide, ethacrynic acid, axosemide, piretanide, tripamide and mersaly) ● Osmotic Diuretics Mannitol, glycerol, urea and isosorbide are inert drugs that can cause osmotic diuresis. these drugs act both in PT as well as loop of Henle,

Pharmacy Study Material http://bit.ly/2XrM83N
Labels:

Comments

Post a Comment

Popular posts from this blog

Diazotization Titrations

Free pharmacy material Diazotization Titrations INTRODUCTION The diazotization titration is nothing but the conversion of the primary aromatic amine to a diazonium compound. This process was first discovered in 1853 and was applied to the synthetic dye industry. The reaction mechanism was first proposed by Peter Griessin. In this method, the primary aromatic amine is reacted with the sodium nitrite in acidic medium to form a diazonium salt. This method is first used in the determination of dyes. PRINCIPLE The principle involved in this method is that the primary aromatic amine present in the sample reacts with the sodium nitrite in the presence of acid such as hydrochloric acid to obtain a diazonium salt. R − NH 2 + NaNO 2 +HCl R − N + ≡ N − Cl − + NaCl + H 2 O Sodium nitrite is added to the solution of amine in the presence of acid at 0–5 °C. The amine reacts with the nitrous acid to form nitrosamine, which is followed by the tautomerisation and the water mol...
165 comments
continue reading

Nephelometry and Turbidimetry

Free pharmacy material Nephelometry and Turbidimetry INTRODUCTION This is mainly used to determine the scattering of the light by the suspended particles present in the sample solution. The instruments used for the measurement of the scattering are called nephelometer and turbidimeters. The choice between the nephelometry and turbidimetry depends upon the fraction of light scattered. This light scattering by the particles which are present in the colloids is known as the Tyndall affect. Nephelometry is the measurement of the scattered light by the suspended particles at right angles to the incident beam. This method is mainly used for the determination of the low concentration suspensions. Turbidimetry is the measurement of the transmitted light by the suspended particles to the incident beam. This is used for the determination of the high concentration suspensions. PRINCIPLE Light scattering is the physical character of the sample which will depend on the following: ...
3 comments
continue reading

Conductometry

Free pharmacy Conductometry INTRODUCTION Conductometry is the measurement of the electrical conductivity of a solution. The conductance is defined as the current flow through the conductor. In other words, it is defined as the reciprocal of the resistance. The unit for the conductance is Seimens (S) which is the reciprocal of Ohm's (Ω −1 ). This method is mainly used for the determination of the physico-chemical properties of the compounds. PRINCIPLE The main principle involved in this method is that the movement of the ions creates the electrical conductivity. The movement of the ions is mainly depended on the concentration of the ions. A + B − + C + D − AD + C + B − where A + B − is the solution of strong electrolyte; C + D − is the solution of the reagent. Here the ionic concentration of A + is determined by reacting the electrolyte solution with the reagent solution so that the A + ions are replaced by the C + ions. This replacement of the ions w...
29 comments
continue reading